ga('create', 'UA-16038215-1', 'auto'); ga('send', 'pageview');
Home | Spray Foam Insulation (page 6)

Spray Foam Insulation

Calculating Yield in Spray Polyurethane Foam Applications

Calculating Spray Foam Yield

A common question among spray foam contractors is “how much yield can I get from my spray foam?” Obtaining good yield from your spray foam can lead to a better bottom line. In many cases, a spray foam contractor will base their purchasing decision on the yield they expect to obtain from a nominal low density, medium density or high ...

Read More »

New Jersey Builder Converts to Spray Foam

He began his success with spray foam through the construction of his very own home Kevin Keefe, at the helm of New Jersey-based KeefeScape Construction, found open-cell spray foam to be an invaluable k asset to a 4-unit condo that he designed and built. In 2007, he constructed the condo complex “Fore at the Shore” in Point Pleasant Beach, NJ, ...

Read More »

The Many Uses and Benefits of Open-Cell Spray Foam Insulation

Open Cell Spray Foam Benefits

Like its name suggests, open-cell foam is made up of tiny bubbles, or cells, that are interconnected. The cells hold air, which provides insulation value – typically between R-3.5and R-4 per inch. Like closed-cell foam, open-cell foam expands to fill gaps and cracks as soon as it’s applied. One of the first noticeable differences with open-cell spray foam is that ...

Read More »

EPA Issues New Guidance Document on Proper Ventilation Techniques During Spray Foam Applications

Last year, in May 2010, NIOSH convened a meeting with key people from the spray foam industry, federal participants, and other vested groups to discuss the challenges of deploying ventilation technologies in the SPF application environment. Discussions included the variability of SPF operations, applications and worksites, typical practices, re-occupancy, overspray and barriers, and the use of natural and mechanical ventilation. ...

Read More »

Ignition Barriers and Thermal Barriers in Attics: International Residential Code (IRC) Requirements

The 2009 International Residential Code establishes prescriptive and alternative performance requirements for spray polyurethane foam (SPF) plastic insulation when installed in residential attic applications to ensure adequate performance of foam in a fire. Meeting Code Requirements: There are two ways to meet the requirements for an ignition barrier or thermal barriers. The first way is the prescriptive requirements listed in the ...

Read More »

Unvented Attics for Existing Buildings

As residential construction has slowed over the past few years, many insulation contractors have turned to weatherization projects that add insulation and air sealing to existing homes. For SPF contractors, one of the easiest and most accessible areas to insulate and air seal is the band joist and to create unvented attics and crawlspaces. Unvented attics can be easily created ...

Read More »

The Battle Against Severe Weather Disasters: Closed-Cell Spray Polyurethane Foam in Hurricane Zones

Spray Foam Magazine - Severe Weather - Closed Cell Spray Foam

Read More »

Spray Foam Adhesives Proven to Strengthen Your Building’s Roof

More and more hurricanes continue to slam to the U.S. coastline each year. In the past decade, billions of dollars worth of property damage and lost lives have prompted research and product development to help prevent this continued destruction to our homes and businesses. Since 1989, over $130 billion in losses were filed due to hurricane related insurance claims. A ...

Read More »
Close Bitnami banner