Q&A Forums
Anyone spraying Certainteed Post New Topic | Post Reply
| Author | Comments |
|---|---|
|
Posted: May 13, 2010 10:53 AM
|
Anyone spraying Certainteed
They have been offering 1/2 and 2 Pound with inventory in our area.Anything good or bad about Certainteed that I should know? |
|
Jeffrey Maine
Posted: May 13, 2010 02:31 PM
|
What is the price a set? |
|
Cory Boehs
Posted: May 13, 2010 07:14 PM
|
I don't have any experience with the 2#, but the open cell is great! I would have to say it is the best 1/2# that I have sprayed. Yields are good, no mixing, no preheating, and no voids or anything. Ya hear me, Rollin? LOL! |
|
Posted: May 13, 2010 07:23 PM
|
No mixing? |
|
Cory Boehs
Posted: May 13, 2010 11:40 PM
|
That's what they claim. If it is not so fresh I will gently mix it for 10 minutes before spraying. Anybody else have thoughts on this? LaPolla, and EZero are the same way. In fact, CertaSpray doesn't even have a center bung. |
|
Posted: May 14, 2010 06:01 PM
|
Picked up a set of 2 Pound closed cell today to try out over the weekend. Product showed up with a bung hole on the B Side Reisin. God, I hope it is closed cell and not open cell mistakenly marked as closed cell. I miss BASF already..... |
|
chad harris
Posted: May 14, 2010 10:12 PM
|
Spraytite 158 is my babe! |
|
chad harris
Posted: May 14, 2010 10:15 PM
|
Has anyone sprayed SWD closed-cell? A local distributor is offering an off the wall price on this product. |
|
Posted: May 15, 2010 02:29 PM
|
2 Pound sprayed fine, even in the rain... |
|
steven argus
Posted: May 15, 2010 11:22 PM
|
A distributor is selling Cert. .5# in my area. I would try it, price is right. But according to their spec sheet, you can't get an R21 in a 2 x 6 stud bay. Mr. inspector says we need the R21 in our area. |
