Q&A Forums
Basement Walls & Thermal Barriers Post New Topic | Post Reply
| Author | Comments |
|---|---|
|
Craig Gifford
Posted: May 15, 2013 03:44 PM
|
Basement Walls & Thermal Barriers
I get so many calls for basement walls....the sill plate & entire foundation wall down to the floor.This makes the basement so much more comfortable! Most building inspector don't have a problem with the sill plate, but when the entire wall is addressed they are looking for a thermal barrier. Anyone have luck with tpr2 Fireshell as a thermal barrier the inspector will approve / they have all the tests as long as your using one of the foams they tested their product with. Also has anyone used Foam Safe by Specialty Products? |
|
SprayFoamSupply.com
Posted: May 15, 2013 05:50 PM
|
DC 315 from paint to protect has been tested over more brands of foam than any other product that I am aware of. Easy one coat application unlike other products that require 2 coats or require mixing 2 products together. Even though it looks well mixed, be sure to mix it well before you apply. See link at left for all of the tested foams. George |
|
Craig Gifford
Posted: May 15, 2013 06:24 PM
|
Thanks George! |
|
Circle-D
Posted: May 15, 2013 09:32 PM
|
I use the DC315 product. Water clean-up, 1 coat application. |
|
Craig Gifford
Posted: May 17, 2013 12:26 PM
|
Thanks! |
