Q&A Forums
E-20 Problem Post New Topic | Post Reply
| Author | Comments |
|---|---|
|
Posted: Dec 23, 2008 08:25 PM
|
E-20 Problem
Does anyone know if there is a way to run more than 200 ft. of hose on an E-20?If I do add another 50ft. of hose to the E-20, is my problem going to be in the pressure that I need to run or will the heaters only heat up the first 200 ft. of hose? I have definately outgrown my E-20 over the past few months and would love to finish off one more job before retiring it into a smaller rig. Any thoughts or suggestions would be appreciated? |
|
clint moore
Posted: Dec 24, 2008 09:35 AM
|
You can add another 50' and get away with it as long as it is non-heated hose. The transformer will only carry 200'. |
|
Posted: Dec 24, 2008 09:38 AM
|
Should I add the hose closer to the gun or the proportioner? Thanks in advance! Steve |
|
clint moore
Posted: Dec 26, 2008 09:39 AM
|
Since it is a NON-heated hose you would connect it to the whip on the gun end. |
|
JR Burnett
Posted: Dec 29, 2008 08:20 AM
|
Graco makes a heated hose controller that allowes you to add up to 200 ft heated hose to any machine..If you have any questions call JR at 706-818-1942 |
