Q&A Forums
E30 motor quit Post New Topic | Post Reply
| Author | Comments |
|---|---|
|
Layton Warren
Posted: Jan 03, 2010 08:55 AM
|
E30 motor quit
My E30 motor quit back in October. The thing started running at wide open and then flashed throught the brush vents and blew the breaker. It kept doing this and so I removed it and had it repaired.I just got it back together yesterday and as soon as the main power is turned on the display boards come on and the motor starts running at high speed again. I disconnected the motor power supply to watch the LED on the board and it is not calling for motor cycles. Do I have a bad board and what causes them to just fail.Thanks |
|
SprayFoamSupply.com
Posted: Jan 03, 2010 05:03 PM
|
Sounds like a bad board. Overheating can cause a board to fail. Basically the relay part of the board is stuck closed. How old is the board? George |
|
Layton Warren
Posted: Jan 03, 2010 08:31 PM
|
The machine is about 2 1/2 years old. It has worked non stop and has been reliable up to this point. |
