Q&A Forums
existing homes with no insulation Post New Topic | Post Reply
| Author | Comments |
|---|---|
|
Thomas Kasper
Posted: May 21, 2008 10:30 PM
|
existing homes with no insulation
I want to insulate old homes that currently have zero insulation. Is there a nozzle that will connect to the fusion gun that can spray 1/2lb foam into drilled holes on the exterior side of the stud walls? I'm hoping to drill holes smaller then 1". I'm thinking 3 holes per stud cavity.
|
|
Luke Kujacznski
Posted: May 22, 2008 10:33 AM
|
You can try that, but you run the risk of blowing walls out. I install and recomend a product like insulsmart from cfi foam. It works really well and you only have to put in one hole per cavity. If you do a search on this forum you will find many conversations about this type of application. Or you can just call me and I will fill you in. Luke 269.217.1612 |
|
Thomas Kasper
Posted: May 22, 2008 11:19 PM
|
Blow walls out with 1/2 pound foam? Are you serious? How much more $ is this insulsmart? (Compared to a set of 1/2 lb) Where can I get an attachment for the fusion to do this? Thanks |
