Fusion Gun Mixing Chamber Question | Equipment Q&A | Spray Foam Technical Questions and Answers | SprayFoam Magazine Q&A Forums

Q&A Forums

Fusion Gun Mixing Chamber Question Post New Topic | Post Reply

Author	Comments
Posted: May 23, 2008 01:56 PM	Fusion Gun Mixing Chamber Question I have been away from the foam business for several years, but recently purchased a Guzmer H 20/35 and a Fusion air purge gun. I was very unhappy with the results of the first roof I sprayed due to the feeing that the gun had to be held too high when spraying to get the pattern to spread out. I used the AR 2020, AR 2929 and AR 3737 champbers with guage pressures 1500 to 2500 lbs to test, but was never happy with the way the gun sprayed. Guzmer does sell wide pattern Mix Chambers (AW 222, AW 2828, etc) but I don't have any idea if these would make me happy. Can you guys with Fusion experience let me what works best for you? If the cahmbers I have been using are not the best for roofing applications, what are they best suited for? Thanks much for your help. Gwin
Energy Tech Solutions Inc. - Chuck Costa Posted: May 28, 2008 11:57 PM	I use a 03 in my fusion it works great for me! I make one pass and it comes out perfect!
Energy Tech Solutions Inc. - Chuck Costa Posted: May 29, 2008 12:01 AM	check out my pictures under job profiles all those jobs are sprayed with a 03 in the fusion!
Posted: May 29, 2008 02:10 AM	OK, thanks, but can you tell me just what chamber the "03" is? Is it the wide spray pattern type? Thanks! Gwin
Energy Tech Solutions Inc. - Chuck Costa Posted: May 29, 2008 07:38 AM	yes it is
SPRAYFOAM GODDESS Posted: Jun 05, 2008 03:03 PM	The 03 chamber, which is a AR6060 is three sizes bigger than your AR3737, it also comes in a wide pattern. The chambers you are using are from 3 to 7 lbs. a min. output, generally used for wall foam.
thomas malloy Posted: Sep 05, 2008 07:12 AM	i also use the fushion and if iam spraying a wide open area i use 70/70 and if iam spraying cavities i use a 52/52 they work great for me.
clint moore Posted: Sep 05, 2008 02:46 PM	The chambers you are using are too small to do wide open roofing.Try a AR5252(02)or a AR6060(03) chamber,watch your overlaps when you spray and move the gun fast enough to keep up with the output so you have a nice even finish.If you are experienced enough try a AR7070 but haul you know what..

Author

Comments

Posted: May 23, 2008 01:56 PM

Fusion Gun Mixing Chamber Question

I have been away from the foam business for several years, but recently purchased a Guzmer H 20/35 and a Fusion air purge gun. I was very unhappy with the results of the first roof I sprayed due to the feeing that the gun had to be held too high when spraying to get the pattern to spread out. I used the AR 2020, AR 2929 and AR 3737 champbers with guage pressures 1500 to 2500 lbs to test, but was never happy with the way the gun sprayed. Guzmer does sell wide pattern Mix Chambers (AW 222, AW 2828, etc) but I don't have any idea if these would make me happy. Can you guys with Fusion experience let me what works best for you? If the cahmbers I have been using are not the best for roofing applications, what are they best suited for? Thanks much for your help.

Gwin

Energy Tech Solutions Inc. - Chuck Costa

Posted: May 28, 2008 11:57 PM

I use a 03 in my fusion it works great for me!
I make one pass and it comes out perfect!

Energy Tech Solutions Inc. - Chuck Costa

Posted: May 29, 2008 12:01 AM

check out my pictures under job profiles all those jobs are sprayed with a 03 in the fusion!

Posted: May 29, 2008 02:10 AM

OK, thanks, but can you tell me just what chamber the "03" is? Is it the wide spray pattern type? Thanks!

Gwin

Energy Tech Solutions Inc. - Chuck Costa

Posted: May 29, 2008 07:38 AM

yes it is

SPRAYFOAM GODDESS

Posted: Jun 05, 2008 03:03 PM

The 03 chamber, which is a AR6060 is three sizes bigger than your AR3737, it also comes in a wide pattern.

The chambers you are using are from 3 to 7 lbs. a min. output, generally used for wall foam.

thomas malloy

Posted: Sep 05, 2008 07:12 AM

i also use the fushion and if iam spraying a wide open area i use 70/70 and if iam spraying cavities i use a 52/52 they work great for me.

clint moore

Posted: Sep 05, 2008 02:46 PM

The chambers you are using are too small to do wide open roofing.Try a AR5252(02)or a AR6060(03)
chamber,watch your overlaps when you spray and move the gun fast enough to keep up with the output so you have a nice even finish.If you are experienced enough try a AR7070 but haul you know what..

You need to login to reply to this topic. Please click here to login.