Graco Fusion Mechanical Purge Tip and Mix Module | Equipment Q&A | Spray Foam Technical Questions and Answers | SprayFoam Magazine Q&A Forums

Q&A Forums

Graco Fusion Mechanical Purge Tip and Mix Module Post New Topic | Post Reply

Author	Comments
inkstreme_05 Posted: Apr 19, 2016 03:46 AM	Graco Fusion Mechanical Purge Tip and Mix Module Hey guys, First time posting! My question is what tip and mix module size is recommended for applying residential spray foam insulation. im currently using the MR6666 mix module and RTM090 tip. im spraying foam in residential and industrial setting. Usually spraying between 2x6 wall studs and 16" centers. This setup was introduced to me while I was insulating Heavy oil production storage tanks. so the gun was needed to be spray continuously for long periods of time and rarely triggered. I no longer do that and was hoping you could recommend a different setup. Thanks guys!
SPRAYFOAM GODDESS Posted: Apr 20, 2016 01:56 PM	MR4747 & RTM055 = 10 lbs/min 9" pattern - up or down from there.

Author

Comments

inkstreme_05

Posted: Apr 19, 2016 03:46 AM

Graco Fusion Mechanical Purge Tip and Mix Module

Hey guys,
First time posting!
My question is what tip and mix module size is recommended for applying residential spray foam insulation. im currently using the MR6666 mix module and RTM090 tip. im spraying foam in residential and industrial setting. Usually spraying between 2x6 wall studs and 16" centers. This setup was introduced to me while I was insulating Heavy oil production storage tanks. so the gun was needed to be spray continuously for long periods of time and rarely triggered. I no longer do that and was hoping you could recommend a different setup. Thanks guys!

SPRAYFOAM GODDESS

Posted: Apr 20, 2016 01:56 PM

MR4747 & RTM055 = 10 lbs/min 9" pattern - up or down from there.

You need to login to reply to this topic. Please click here to login.