Q&A Forums
Graco mechanical purge mixing module Post New Topic | Post Reply
| Author | Comments |
|---|---|
|
Ron McMullin
Posted: May 07, 2007 11:26 PM
|
Graco mechanical purge mixing module
Don't throw away your mixing module that your helper drilled out. If you have reamed out the side mix holes and they are too big or just out of shape, fill them with jb weld, move to a new spot and drill new holes the correct size. you match the angle of the old hole by putting a drill bit in it and use it as a guide for the new hole. Re drill all the holes at once. This works great.
|
