Peel off lens covers? type of respirators used? | Equipment Q&A | Spray Foam Technical Questions and Answers | SprayFoam Magazine Q&A Forums

Q&A Forums

Peel off lens covers? type of respirators used? Post New Topic | Post Reply

Author	Comments
Posted: Oct 23, 2007 03:39 PM	Peel off lens covers? type of respirators used? Hey yall, Just wondering what type respirators you are using and where you are purchasing the peel off lens covers. These seem to cost a small fortune at the end of a month of heavy spraying. Not complaining mind you about the work, just looking to see if I may reduce the OH a little. Thanks in advance for the input. Kenneth
clint moore Posted: Oct 23, 2007 07:08 PM	ALLEGRO SELLS A PRETTY GOOD SELECTION OF RESPIRATORS AND AIR MOVING EQUIPMENT, ASK YOUR SALES REP. IF YOU CAN GET A PRICE BREAK ON PEEL OFFS IF YOU BUY IN BULK.
Gerry Wagoner Posted: Oct 23, 2007 08:43 PM	3M L-501 PAPR. Lense covers from Northern Safety. oG example: http://cgi.ebay.com/3M7190-PAPR-Belt-Mounted-Paint-Spray-GVP-Respirator-Kit_W0QQitemZ230152652165QQihZ013QQcategoryZ11905QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
SprayFoamSupply.com Posted: Oct 24, 2007 05:58 AM	I use the advanz lens covers with good results. You get about 33 advanses each @ $10 each. About 33 cents per frame. George
Michael Flander Posted: Oct 24, 2007 09:27 AM	We stock allegro products Kenneth :).
Rob Granger Posted: Oct 31, 2007 04:33 PM	I found a great way to keep my mask clean today. I bought this product called Let-Loose. I spray it on my lens cover(not to much or it fogs up) and when it gets covered I just rub the cover with my cotton glove.. It works great. Sprayed all after noon today with just one cover and I was spraying CC..
Darren Gomez Posted: Nov 05, 2007 12:38 AM	Allegro has great air system. 3m has full face respirators and sells lens covers. Talk to your local safety supply guy. CPI sells allegro systems and covers you can find them on the net at cpifoam.com. If you have any technical questions talk to Tyson. Tell him Darren sent you.
Mike Stephenson Posted: Nov 05, 2007 05:29 PM	Hey Yes, Where did you find "Let-Loose" product. I've been looking for some type of foam release spray. Thanks.
Rob Granger Posted: Nov 05, 2007 08:36 PM	STFI, Let-Loose, 1-888-949-9089. Works great on the gun too, especially the tip. It is expensive at $ 15 a can but I believe worth the cost.. I would love to have it analyzed and copied but that costs money too... If you ever find something similar and cheaper let me know, Thanks.
Melvin Chandler Posted: Nov 12, 2007 09:13 PM	We've used release agent and heard that Rain-X does a good job.
Timothy Sonney Posted: Nov 26, 2007 01:27 AM	anyone got a good hookup on NORTH 80836A lens's?
SPRAYFOAM GODDESS Posted: Dec 01, 2007 05:41 AM	BSNA - P******nix carries all types of peel-offs, Allegro, Bullard, and also the Advanz line of covers. We also carry a line of mold release, won't work for the respirators, but will work for the studs.

Author

Comments

Posted: Oct 23, 2007 03:39 PM

Peel off lens covers? type of respirators used?

Hey yall, Just wondering what type respirators you are using and where you are purchasing the peel off lens covers. These seem to cost a small fortune at the end of a month of heavy spraying. Not complaining mind you about the work, just looking to see if I may reduce the OH a little.

Thanks in advance for the input.

Kenneth

clint moore

Posted: Oct 23, 2007 07:08 PM

ALLEGRO SELLS A PRETTY GOOD SELECTION OF RESPIRATORS AND AIR MOVING EQUIPMENT, ASK YOUR SALES REP. IF YOU CAN GET A PRICE BREAK ON PEEL OFFS IF YOU BUY IN BULK.

Gerry Wagoner

Posted: Oct 23, 2007 08:43 PM

3M L-501 PAPR. Lense covers from Northern Safety.

oG

example:
http://cgi.ebay.com/3M7190-PAPR-Belt-Mounted-Paint-Spray-GVP-Respirator-Kit_W0QQitemZ230152652165QQihZ013QQcategoryZ11905QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

SprayFoamSupply.com

Posted: Oct 24, 2007 05:58 AM

I use the advanz lens covers with good results. You get about 33 advanses each @ $10 each. About 33 cents per frame.

George

Michael Flander

Posted: Oct 24, 2007 09:27 AM

We stock allegro products Kenneth :).

Rob Granger

Posted: Oct 31, 2007 04:33 PM

I found a great way to keep my mask clean today. I bought this product called Let-Loose. I spray it on my lens cover(not to much or it fogs up) and when it gets covered I just rub the cover with my cotton glove.. It works great. Sprayed all after noon today with just one cover and I was spraying CC..

Darren Gomez

Posted: Nov 05, 2007 12:38 AM

Allegro has great air system. 3m has full face respirators and sells lens covers. Talk to your local safety supply guy. CPI sells allegro systems and covers you can find them on the net at cpifoam.com. If you have any technical questions talk to Tyson. Tell him Darren sent you.

Mike Stephenson

Posted: Nov 05, 2007 05:29 PM

Hey Yes,
Where did you find "Let-Loose" product. I've been looking for some type of foam release spray.
Thanks.

Rob Granger

Posted: Nov 05, 2007 08:36 PM

STFI,
Let-Loose, 1-888-949-9089. Works great on the gun too, especially the tip. It is expensive at $ 15 a can but I believe worth the cost.. I would love to have it analyzed and copied but that costs money too... If you ever find something similar and cheaper let me know, Thanks.

Melvin Chandler

Posted: Nov 12, 2007 09:13 PM

We've used release agent and heard that Rain-X does a good job.

Timothy Sonney

Posted: Nov 26, 2007 01:27 AM

anyone got a good hookup on NORTH 80836A lens's?

SPRAYFOAM GODDESS

Posted: Dec 01, 2007 05:41 AM

BSNA - P******nix carries all types of peel-offs, Allegro, Bullard, and also the Advanz line of covers. We also carry a line of mold release, won't work for the respirators, but will work for the studs.

You need to login to reply to this topic. Please click here to login.