Tip Size/Performance | Equipment Q&A | Spray Foam Technical Questions and Answers | SprayFoam Magazine Q&A Forums

Q&A Forums

Author	Comments
Rob Granger Posted: Oct 26, 2007 08:17 AM	Tip Size/Performance Guys, I am spraying my first residential roof deck with CC, Fusion air purge and a 3333 fan tip. Heat at 130 and pressure at 1400. Foam is water blown polar blend. We only seem to be getting a 1 inch rise on each pass. We struggle to spray a set in 6 hours. I believe something is not right but am not sure for yield is not where I think it should be and amount sprayed is less than I believe it can be. We are using band heaters at 80 degrees, with the temp in NY at about 50 degrees in the morning and gets to 60 -65 by mid day and then 50 at night.. We are using an E-20. Thanks
SPRAYFOAM GODDESS Posted: Dec 01, 2007 06:02 AM	Give me a call to discuss all these variables. 800.289.8272 - Robin

Author

Comments

Rob Granger

Posted: Oct 26, 2007 08:17 AM

Tip Size/Performance

Guys, I am spraying my first residential roof deck with CC, Fusion air purge and a 3333 fan tip. Heat at 130 and pressure at 1400. Foam is water blown polar blend. We only seem to be getting a 1 inch rise on each pass. We struggle to spray a set in 6 hours. I believe something is not right but am not sure for yield is not where I think it should be and amount sprayed is less than I believe it can be. We are using band heaters at 80 degrees, with the temp in NY at about 50 degrees in the morning and gets to 60 -65 by mid day and then 50 at night.. We are using an E-20. Thanks

SPRAYFOAM GODDESS

Posted: Dec 01, 2007 06:02 AM

Give me a call to discuss all these variables. 800.289.8272 - Robin

You need to login to reply to this topic. Please click here to login.