ULC-S705.2-02 Specification | Ask Mason Knowles - SPF Consultant | Spray Foam Technical Questions and Answers | SprayFoam Magazine Q&A Forums

Q&A Forums

Author	Comments
richard sucher II Posted: Sep 03, 2009 01:23 PM	ULC-S705.2-02 Specification Am investigating AABA membership and its requirements. The above referenced spec is called out - where can I find the spec? Is it available for no charge online or do you have to pay for the spec?
mason Posted: Sep 03, 2009 01:57 PM	This is a Canadian standard for the application of spray polyurethane foam. I downloaded the following information from the United Laboratories Canada website: "CAN/ULC-S705.2-05, Standard for Thermal Insulation - Spray Applied Rigid Polyurethane Foam, Medium Density - Application. This Edition has been approved by the ULC Committee on Thermal Insulation Materials and Systems, and is dated February 2005, while the First Edition of this Standard was published in April 1998. CAN/ULC-S705.2-05 outlines requirements for the installation of spray applied rigid polyurethane foam, medium density. The material can be installed as thermal insulation, air barrier, vapour barrier or any combination of these three applications. The application requirements are for the installation of spray applied rigid polyurethane cellular plastic whether applied on a building site or in a prefabrication (manufacturing) facility. These requirements include obligations for the manufacturer (or supplier), the contractor and the installer. This Standard can be ordered for $150.00 though our website at www.ulc.ca by clicking on Order Standards and Directories and then selecting ULC Online Store."

Author

Comments

richard sucher II

Posted: Sep 03, 2009 01:23 PM

ULC-S705.2-02 Specification

Am investigating AABA membership and its requirements. The above referenced spec is called out - where can I find the spec? Is it available for no charge online or do you have to pay for the spec?

mason

Posted: Sep 03, 2009 01:57 PM

This is a Canadian standard for the application of spray polyurethane foam. I downloaded the following information from the United Laboratories Canada website:

"CAN/ULC-S705.2-05, Standard for Thermal Insulation - Spray Applied Rigid Polyurethane Foam, Medium Density - Application. This Edition has been approved by the ULC Committee on Thermal Insulation Materials and Systems, and is dated February 2005, while the First Edition of this Standard was published in April 1998.

CAN/ULC-S705.2-05 outlines requirements for the installation of spray applied rigid polyurethane foam, medium density. The material can be installed as thermal insulation, air barrier, vapour barrier or any combination of these three applications. The application requirements are for the installation of spray applied rigid polyurethane cellular plastic whether applied on a building site or in a prefabrication (manufacturing) facility. These requirements include obligations for the manufacturer (or supplier), the contractor and the installer.

This Standard can be ordered for $150.00 though our website at www.ulc.ca by clicking on Order Standards and Directories and then selecting ULC Online Store."

You need to login to reply to this topic. Please click here to login.