IFTI and Demilec Successfully Pass Multiple Thermal and Ignition Barrier Testing

IRVINE, CA – March 12, 2015 – International Fireproof Technology Inc. (IFTI) and Demilec Inc., announced that DC315 spray-applied, fire protective coating, has successfully passed three (3) NFPA 286 Room Corner Burn test as an alternative thermal barrier solution, and one NFPA 286 Appendix X test for ignition barrier over Demilec's spray polyurethane foams. The certified testing was ran and passed at QAI an IAS Accredited testing facility in Tulsa, Oklahoma.

“We are very excited to add Demilec to the IFTI – DC315 coating family," stated Gary Wolfe, Executive Vice President of IFTI."IFTI leads the industry with its catalog of over 135 full scale certified tests. Any coating company can tell you their coating will work on the foam brand you spray; it is another thing to prove it with testing. If you are not using DC315 you may not be complying with the codes!"

Following is a list of Demilec's spray polyurethane foams that were tested to date. IFTI expects to wrap up testing with Demilec on the remaining SPF's over the next 45 days.

All tests are full scale tests and meet the applicable requirements of 2006 IBC Section 803.2.1; 2009 IBC Section 803.2.1 and Section 2603.9; 2012 IBC Section 803.2.1 and Section 2603.10 Special Approval for Thermal Barrier Alternatives. DC315 also meets the requirement as an Ignition Barrier per AC 377, Appendix X at an incredible spread rate of 400 sq. ft. per gallon, making DC315 the most cost effective ignition and thermal barrier on the market.

DC 315 is a one-coat, wet-on-wet application, waterbased latex paint that offers superior fire protection over foam. DC315 applies like regular latex paint using an airless sprayer, and being waterbased, offers easy clean up.

About International Fireproof Technology, Inc.: IFTI manufactures state-of-the-art intumescent fire retardants and thermal barrier coatings. Designed and tested for the global market, IFTI's products are widely used in hospitals, restaurants, nursing facilities, commercial buildings, and residential homes. IFTI's products, including DC315, fall under the Paint to Protect brand, and have been developed to provide superior cost-effective fire protection over spray polyurethane foam. for more information, please use the contact details and links provided below.

About Demilec: Demilec has been recognized as an industry leader in using innovative technology and advanced science to create a line of open-cell and closed-cell spray foam insulation and coatings for more than 30 years. Demilec focuses on meeting market demands for more energy-efficient products and serves a range of industries, including industrial, residential, commercial, agricultural, original equipment manufacturer, education, water, oil & gas, energy, military and civil. For more information, please use the contact information and links provided below.