Q&A Forums
Hose heat, Post New Topic | Post Reply
| Author | Comments |
|---|---|
|
Tim O'Keefe
Posted: Sep 24, 2007 01:58 PM
|
Hose heat,
Has anyone experienced a deformation in vinyl siding caused by the hose heat? I had a hose brought in through a second story window and the hose was near but not directly against the vinyl siding. There appears to be a vertical mark about 6' long which has deformed the vinyl which looks like it was caused by heat. Any thoughts? I don't want to take the blame for it, but I have no other possibly causes in mind. We are going to check the hose heat with a temp. gun tomorrow and see but feel it is an unlikely cause.Thanks, Tim Granite State Spray Foam Co. |
|
Michael Flander
Posted: Sep 24, 2007 02:45 PM
|
Is it possible to post a picture of it Tim? |
|
Tim O'Keefe
Posted: Sep 25, 2007 07:55 PM
|
I am off the hook. Seems the sun was reflecting off the window and generating enough heat to melt/deform the plastic. I was pretty sure the hose was not the culprit. Thanks again. Tim Granite State Spray Foam Co. |
