Q&A Forums
Spray foam looks like its shrinking HELP!! Post New Topic | Post Reply
| Author | Comments |
|---|---|
|
italy2003gt
Posted: Dec 01, 2016 12:30 AM
|
Spray foam looks like its shrinking HELP!!
I recently had a pole barn building galvanized spray foamed with henry premix 1.8 closed cell.. I believe the outside temps were around 35 degrees... along the bottom of the building where it meets the foundation there are holes opening up and some of the holes have moisture on them, the corner has a huge gap some of the foam when i push on it it feels like you can squish it. one area I see water on the foam like it is sweating... not sure what is going on everyday i notice more and more holes... the walls were suppose to be sprayed at 2 inches but some areas have a half inch and some spots 5-6 inches..... the spray foam installer keeps giving me a run a round...
|
|
mason
Posted: Dec 06, 2016 10:47 AM
|
Contact the technical folks at Henry company for assistance, send photos and hopefully they will send a representative out to troubleshoot the application. If you get no response, contact me at masonknowles@aol.com Mason |
